China Industrial Pumps for Water Treatment Market Key Takeaways

• The China industrial pumps for water treatment market is valued at USD 2.57 billion in 2025 and is projected to reach USD 2.75 billion in 2026 and USD 4.20 billion by 2032.
• The industry is projected to witness steady growth at a 7.31% CAGR during 2026–2032.
• Centrifugal pumps remain the dominant product type, accounting for an estimated 52% market share in 2026.
• Chemicals & petrochemicals is the leading end-user segment, accounting for a 26% share in 2026.
• The market is moderately fragmented, with the top 5 manufacturers estimated to account for approximately 35% of market revenue in 2026.

China Industrial Pumps for Water Treatment Market Size and Outlook

The China industrial pumps for water treatment market is valued at USD 2.57 billion in 2025, reaches USD 2.75 billion in 2026, and is projected to attain USD 4.20 billion by 2032, representing a 7.31% CAGR over the forecast period.

The expansion reflects continued investment in water-reuse infrastructure, tighter environmental-performance requirements and increasing demand for efficient pumping equipment across industrial treatment systems.

The 14th Five-Year Plan for Urban Wastewater Treatment and Resource Utilization provides a structural demand base by targeting expanded wastewater collection, treatment and resource recovery infrastructure. The plan also addresses sludge treatment and disposal, requiring treatment operators to upgrade hydraulic handling, dewatering, and transfer systems as wastewater infrastructure moves toward higher resource-recovery performance. This creates recurring equipment demand because new and upgraded treatment assets require pumps across intake, transfer, circulation, sludge and discharge stages.

Environmental performance is also strengthening the replacement and upgrade cycle. China's 2024 national surface-water Grade I–III compliance reaches 90.4%, compared with 89.4% in 2023, indicating that national water-quality performance is moving beyond the 14th Five-Year Plan benchmark and placing greater emphasis on remaining pollution sources and treatment performance. For pump suppliers, this favors higher-efficiency, corrosion-resistant, and digitally monitored equipment capable of maintaining stable hydraulic performance under increasingly stringent treatment conditions.

China Industrial Pumps for Water Treatment Market Key Indicators

• The Ministry of Ecology and Environment reports that 90.4% of China’s 3,641 national surface-water assessment sections achieve Grade I–III quality in 2024, up 1.0 percentage point from 2023; as municipal water quality improves, remaining compliance pressure increasingly concentrates on industrial discharge, supporting demand for reliable wastewater-treatment and effluent-handling equipment.
• Effective March 1, 2026, GB 19762-2025 establishes China's current mandatory minimum energy-efficiency values and efficiency grades for centrifugal pumps, following its issuance by SAMR and the National Standardization Administration on February 28, 2025; the updated standard replaces the previous GB 19762 framework and strengthens the technical basis for high-efficiency centrifugal-pump replacement and procurement.
• Based on the Ministry of Water Resources' 2025 water-use statistics, China's total water consumption reaches 594.45 billion m³, including 95.37 billion m³ of industrial water use, demonstrating the substantial scale of industrial water circulation that requires pumping, treatment, recycling, and process-water transfer infrastructure.

China Industrial Water Consumption & Pump Demand Analysis

China’s industrial sector remains a major water-consuming base, creating a direct demand foundation for industrial pumping, treatment, circulation, and reuse equipment. According to the Ministry of Industry and Information Technology (MIIT), industrial water consumption reaches 97.1 billion m³ in 2024, equivalent to approximately 16% of national water use, while industrial water intensity stands at 24 m³ per USD 1420 of industrial value added. The commercial opportunity for industrial pumps therefore comes from the scale of water that must be transferred, circulated, treated, and increasingly reused across water-intensive manufacturing facilities.

The scale of industrial water consumption creates a substantial addressable base for China's industrial water treatment pump market, but water reuse is becoming the stronger incremental demand driver. MIIT and the Ministry of Water Resources target approximately 94% industrial water reuse among above-scale industries, while the government identifies steel, petrochemicals and chemicals, textiles, paper, food and non-ferrous metals as priority sectors for wastewater recycling. This increases recurring requirements for transfer, circulation, filtration-feed, RO-feed and wastewater pumps across industrial facilities.

Prioritize steel, petrochemical & chemical, power, non-ferrous metals, paper and food-processing facilities, where water-intensive operations and recycling requirements generate multiple pumping points. Focus on high-efficiency centrifugal pumps, submersible wastewater pumps, sludge pumps, positive-displacement pumps and RO-feed systems, particularly for plant modernization and water-reuse projects. MIIT identifies high-concentration organic wastewater, high-salinity wastewater, membrane materials, intelligent monitoring and optimization control as priority industrial water-saving technology areas, creating an opportunity to move from standalone pump sales toward integrated pumping, treatment and intelligent water management systems.

China Industrial Pumps for Water Treatment Market Scope

Category	Segments
By Product Type	Centrifugal Pumps, Positive Displacement Pumps, Other Pumps
By Treatment Application	Water Intake & Transfer, Process & Utility Water Circulation, Core Treatment Processes (Primary, Secondary & Tertiary), Membrane & Reverse Osmosis Systems, Sludge Handling & Dewatering, Water Reuse, Recycling & Zero Liquid Discharge (ZLD), Chemical Dosing & Disinfection, Other Treatment Applications
By End-Use Industry	Chemicals & Petrochemicals, Power Generation, Oil & Gas, Mining & Metals, Food & Beverage, Pharmaceuticals, Pulp & Paper, Textiles, Semiconductor & Electronics, Other Manufacturing Industries

China Industrial Pumps for Water Treatment Market Growth Driver

Mandatory Efficiency Upgrade Accelerates Industrial Pump Replacement Cycle

The strongest quantifiably defensible growth driver for the China industrial pumps for water treatment market is the mandatory implementation of GB 19762-2025, issued by the State Administration for Market Regulation (SAMR) and the National Standardization Administration on February 28, 2025, effective from March 1, 2026. The revised standard replaces the previous efficiency framework. It establishes updated minimum energy-efficiency requirements for centrifugal pumps, increasing the compliance pressure on industrial operators and strengthening the replacement case for inefficient legacy equipment.

This regulatory tightening reinforces China's parallel expansion of water-reuse infrastructure. Under the 14th Five-Year Plan for Urban Sewage Treatment and Resource Utilization, China targets at least 15 million m³/day of additional reclaimed-water production capacity by 2025, expanding requirements for transfer, circulation, and treatment-feed pumping systems. The combination of new treatment capacity and mandatory pump-efficiency requirements creates a synchronized procurement cycle, supporting replacement and new-installation demand for high-efficiency centrifugal pumps across chemical, petrochemical and municipal-industrial treatment facilities.

Recent Trend

Smart Variable-Speed Pumping Gains Momentum as China Scales Digital Water Efficiency

China’s industrial water-treatment sector is moving toward digitally monitored and energy-optimized pumping architectures. According to the Ministry of Industry and Information Technology (MIIT), China has accumulated more than 8,000 national green factories, while the 2025 green-manufacturing program adds 2,038 green factories and 128 green industrial parks. MIIT also identifies intelligent water-use control using big data, cloud computing, and AI as a priority technology area, supporting wider adoption of variable-speed and sensor-enabled pumping systems. This shifts pump demand toward equipment capable of dynamically matching flow and pressure to changing process loads.

On the equipment side, Shanghai Kaiquan Pump (Group) Co., Ltd. is commercializing intelligent VFD pumping systems, including the GXS High-Efficiency Intelligent Module Pump Unit, covering 10–7,200 m³/h. In a 2024 water-transfer project, Kaiquan supplied four variable-frequency horizontal double-suction pumps with IoT monitoring, with the system expected to save USD 153,000 annually in electricity costs. These launches demonstrate rising demand for connected, variable-speed pumping packages.

China Industrial Pumps for Water Treatment Market Opportunities and Challenges

Stricter Sludge-Dewatering Requirements Open a High-Solids Pumping Opportunity

Sludge handling is becoming a more demanding operating requirement for wastewater-treatment facilities as environmental inspections place greater emphasis on compliant sludge disposal. In a 2025 inspection, the Ministry of Ecology and Environment identified a facility generating approximately 5,000 tonnes of sludge annually, with sludge moisture reported at 70%–80%, creating a substantial gap versus the <60% moisture level required for compliant disposal. Higher-solids sludge also increases viscosity, abrasion, and clogging risks, making conventional low-pressure pumping configurations less suitable for continuous transfer and dewatering-feed duties.

This operating pressure strengthens demand for heavy-duty sludge and slurry pumping systems, particularly equipment designed for high-solids transfer and reliable continuous operation. In July 2025, KSB introduced its new wastewater-pump solutions, while its Bailonggang project deployment supplied 241 Amacan submersible pumps, 65 Amarex KRT/Amarex N pumps, six SPN wastewater pumps, and six ZL axial-flow pumps for a facility treating more than 2 million m³/day. These deployments demonstrate the commercial opportunity for higher-capacity, clog-resistant, and application-specific pumping systems as Chinese treatment infrastructure becomes larger and more technically demanding.

Segmentation Insights

High-Flow Multi-Stage Centrifugal Systems Anchor China’s Industrial Water Backbone

Centrifugal pumps are estimated to account for 52% of 2026 market revenue, making them the largest product-type segment because they serve the broadest range of continuous-flow water-treatment duties. Centrifugal architecture remains the baseline for EPC system integrators because it reliably handles flow rates from 10 m³/h to more than 10,000 m³/h, while providing steady pressure, efficient handling of changing fluid loads, and straightforward integration into large industrial plant layouts. This broad operating envelope supports extensive deployment across water intake, transfer, circulation, and wastewater discharge applications.

This broad duty coverage directly translates into higher equipment revenue, as large industrial and municipal treatment facilities typically require multiple centrifugal pumps across different hydraulic stages. Their ability to maintain continuous flow while accommodating variable process loads also reduces the need for separate pump architectures across many applications. Furthermore, GB 19762-2025, effective March 1, 2026, establishes mandatory energy-efficiency requirements for centrifugal pumps, reinforcing their importance within China's installed industrial base and creating an additional replacement opportunity for higher-efficiency models. Based on product type, the industry is segmented into:

• Centrifugal Pumps
• Positive Displacement Pumps
• Other Pumps

Environmental Discharge Mandates Cement Water & Wastewater Procurement Leadership

Chemicals & Petrochemicals Leads Industrial Pump Demand as Water-Intensive Processing Expands

Chemicals & Petrochemicals is positioned as the leading end-user segment with an estimated 26% of 2026 market revenue, making them the largest end-user segment because its production processes require continuous water circulation, cooling, wastewater handling and treatment across multiple process stages. China’s industrial water use reaches 97.1 billion m³ in 2024, while MIIT’s 2025–2030 water-saving equipment program specifically prioritizes industrial wastewater recycling, membrane separation, and advanced water-treatment equipment, strengthening recurring pump demand across chemical-processing facilities. The segment therefore supports high utilization of centrifugal, positive-displacement and specialty pumps.

Demand is also broadening beyond conventional water transfer toward closed-loop recycling, advanced treatment and digitally controlled pumping. MIIT identifies 32 pilot enterprises and industrial parks and 58 industrial water-reuse cases under its water-saving initiatives, while semiconductor and electronics manufacturing provides an additional high-growth niche: China’s electronic information manufacturing revenue reaches USD 2.59 trillion in 2025, up 7.4%, and integrated-circuit output rises 10.9% to 4,843 billion units. This creates opportunities for high-purity, corrosion-resistant and precision pumping systems. Based on End-User Industry, the industry is segmented into:

• Chemicals & Petrochemicals
• Power Generation
• Oil & Gas
• Mining & Metals
• Food & Beverage
• Pharmaceuticals
• Pulp & Paper
• Textiles
• Semiconductor & Electronics
• Other Manufacturing Industries

China Industrial Pumps for Water Treatment Market Competitive Analysis

The China industrial pumps for water treatment market is moderately fragmented, with the top five manufacturers estimated to account for approximately 35% of 2026 market revenue. The leading companies are Grundfos Holding A/S, Shanghai Kaiquan Pump (Group) Co., Ltd., Xylem Inc., KSB SE & Co. KGaA, and WILO SE.

Top Companies in the China Industrial Pumps for Water Treatment industry:

• Grundfos Holding A/S
• Shanghai Kaiquan Pump (Group) Co., Ltd.
• Xylem Inc.
• KSB SE & Co. KGaA
• WILO SE
• EBARA Corporation
• Sulzer Ltd
• Flowserve Corporation
• Shanghai Liancheng (Group) Co., Ltd.
• Shanghai Dongfang Pump Industry (Group) Co., Ltd.

China Industrial Pumps for Water Treatment Industry News and Recent Developments

July 2025: KSB Launches AmaCan P Submersible Motor Pump Series

KSB introduces the AmaCan P generation of submersible motor pumps with axial propellers in July 2025. The series is designed for large-volume municipal and industrial water as well as wastewater applications, including stormwater, drainage and irrigation pumping stations. The design incorporates three-blade impellers with high free passage and adjustable blade angles to achieve application-specific operating points.

Impact Analysis: The launch strengthens KSB's positioning in high-volume water and wastewater pumping where hydraulic efficiency and operating reliability are critical. Its industrial-water applicability also supports broader penetration into treatment infrastructure requiring large-flow pumping.

September 2025: EBARA Launches DKE High-Efficiency Anti-Clog Wastewater Pump

EBARA launches the DKE anti-clog submersible wastewater pump for global 50-Hz markets in September 2025, with sales expansion to China and other regions. The pump handles 0.07–13 m³/min, operates at 4–44 m head, uses 1.5–45 kW motors, and incorporates an IE3 motor that can reduce power consumption by up to 15% compared with conventional models.

Impact Analysis: The product directly addresses two major wastewater-pump operating constraints: solids-induced clogging and energy consumption. Its China availability strengthens competition in submersible wastewater equipment and supports replacement demand for energy-intensive installed assets.

March 2025: Sulzer Introduces Pump Energy Optimization Service

Sulzer launches its Energy Optimization Service in March 2025 to improve centrifugal-pump efficiency through digital assessment, machine learning, monitoring and engineered retrofits. The service covers hydraulic rerating, specialized coatings, wear-clearance optimization and performance monitoring, targeting energy-intensive sectors including water desalination, power, chemicals and oil and gas.

Impact Analysis: The development shifts competitive differentiation toward lifecycle performance rather than pump-unit sales alone. This creates an additional revenue stream around retrofit, monitoring and efficiency optimization as Chinese industrial operators face stronger energy-performance requirements.