Mexico Water and Waste Water Pump Market Research Report: Forecast (2026-2032)

Mexico Water and Waste Water Pump Market Report Key Takeaways:

• Market size was valued at around USD 85.33 million in 2025 and is projected to reach USD 113.4 million by 2032. The estimated CAGR from 2026 to 2032 is around 4.85%, indicating strong growth.
• Centrifugal pumps lead the Mexico Water and Wastewater Pump Market in 2025 primarily due to their high efficiency in handling large water volumes, cost-effective installation and maintenance, and strong suitability for municipal water supply and wastewater treatment operations.
• In 2025, the municipal water & wastewater segment captured 70.2% of the Mexico water and wastewater pump market size. Meanwhile, the industrial water and wastewater segment is poised to be the fastest-growing end-user category, with a projected 3.7% CAGR during 2026-32.
• Leading companies in the Mexico Water and Wastewater Industry are Flowserve Corporation, Ebara Corporation, WILO SE, Sulzer Limited, Grundfos Holding A/S, Xylem Inc., KSB SE & Co. KGaA, Kirloskar Brothers Limited, Franklin Electric, Pentair PLC, and others.

Market Insights & Analysis: Mexico Water and Wastewater Pump Market (2026-32):

The Mexico Water and Wastewater Pump Market size was valued at around USD 85.33 million in 2025 and is projected to reach USD 113.4 million by 2032. Along with this, the market is estimated to grow at a CAGR of around 4.85% during the forecast period, i.e., 2026-32.

Mexico water & wastewater pump industry is witnessing sustained growth, largely because the country’s water cycle is under simultaneous pressure from high distribution losses, incomplete wastewater treatment coverage, and accelerating industrial expansion. Firstly, municipal water utilities continue to face severe efficiency constraints: the weighted average non-revenue water (NRW) is 38% for utilities serving populations above 50,000, implying that over one-third of supplied water is lost through leakages, illegal connections, and weak metering/collection systems. This directly drives demand for booster pumps, pressure management pumping solutions, and network rehabilitation projects, as utilities must stabilize flow and reduce losses.

Additionally, wastewater infrastructure gaps are a major catalyst for pump demand. Mexico has about 2,540 municipal wastewater treatment plants, yet in 2018, they treated only 137.7 m³/s, equivalent to 64% of the 215.2 m³/s collected through sewage systems, highlighting strong expansion potential for lift stations, submersible wastewater pumps, sludge handling pumps, and retrofit pumping systems.

Moreover, rising urban service requirements and quality expectations are widening the opportunity for pumping upgrades, as national research indicates that although 95% of the population has access to drinking water sources, only around 65% of domestic wastewater is treated to safe levels, leaving a sizable treatment and compliance gap.

Furthermore, industrial development is strengthening market fundamentals. CONAGUA-linked estimates indicate Mexico operates 984 potable water treatment plants, 2,540 municipal WWTPs, and 3,144 industrial WWTPs, implying expanding industrial effluent pumping needs, especially in nearshoring-driven clusters.

Overall, Mexico’s pump market growth is increasingly driven not only by new capacity creation but also by replacement and modernization demand, favoring energy-efficient pumps, automation-enabled monitoring, and high-durability wastewater equipment across municipal and industrial users.

Mexico Water and Wastewater Pump Industry Recent Development:

• March 2024: Sulzer inaugurates new high-performance pump facility in Mexico: Sulzer officially inaugurated a new high-performance pump test and assembly center at its existing site in Cuautitlán Izcalli, State of Mexico. The facility features a 10-meter deep hydraulics test bed with a capacity of up to 23,000 m³/h, enabling full performance validation of large industrial and municipal pumps before delivery.
• July 2024:  Mexico City inaugurates two new water treatment plants in Tláhuac, Iztapalapa, and Xochimilco: The Mexico City government inaugurated two new water treatment plants in the boroughs of Tláhuac, Iztapalapa, and Xochimilco as part of efforts to improve water quality and supply in the southeast of the city. These plants are designed to treat and distribute potable water to thousands of homes in underserved areas, reducing reliance on informal water sources and improving access to safe drinking water.
• 2024: An inauguration ceremony was held for the main components of the Gustavo Díaz Ordaz sewerage and sanitation project, which includes a new wastewater treatment plant (WWTP), a main pumping station, and a pressure outfall. This will benefit the 12,500 residents of this border city in Tamaulipas by providing adequate treatment to the collected wastewater and reducing the contamination of natural surface and groundwater sources shared between Mexico and the U.S.

Mexico water and wastewater pump Market Scope:

Mexico water and wastewater pump Market Driver:

Government-Led Water Infrastructure Modernization

The most significant driver of Mexico’s water and wastewater pump market is the government-backed modernization of water supply, drainage, and sanitation infrastructure, which has intensified from 2024 onward due to escalating water stress, leakage losses, and rapid urban demand growth. Unlike cyclical demand from agriculture or industry, federal-led water programs create structural, multi-year procurement pipelines, where pumps become mandatory assets for transmission lines, deep well extraction, booster stations, lift stations, and wastewater conveyance networks feeding treatment facilities. Since pumping systems are the fastest assets to deploy compared to full pipeline rehabilitation, governments are increasingly prioritizing pump-centric upgrades to stabilize pressure, reduce downtime, and expand service coverage. Key government-backed infrastructure initiatives creating pump demand:

• 2024: Launch and execution push under the National Water Plan (Plan Nacional Hídrico 2024–2030) framework (presented in Nov 2024) focused on water security and infrastructure strengthening
• 2024 (Dec): Implementation of the “Acuerdo Nacional por el Derecho Humano al Agua y la Sustentabilidad”, strengthening policy momentum for sustainability, efficiency, and water access
• 2025 (Mar): Strengthening of PROAGUA, aimed at expanding and improving potable water, sewage, and sanitation services, directly linked to new pumping stations and network upgrades
• 2025: Continued focus on operator modernization through mechanisms tied to FONADIN / PROMAGUA, supporting structured financing models and PPP-type modernization programs

Collectively, these initiatives drive demand not only for higher pump volumes but also for high-duty, energy-efficient, clog-resistant wastewater pumps, making government modernization the strongest growth engine in Mexico’s market.

Mexico Water and Wastewater Pump Market Opportunity:

Decentralized Wastewater Treatment in Peri-Urban Areas

A major upcoming opportunity for Mexico’s water and wastewater pump market lies in the expansion of decentralized and modular wastewater treatment solutions in peri-urban and underserved settlements, where extending full trunk sewer networks is costly, slow, and politically complex. Rapid urban sprawl around major cities has created densely populated clusters with high sewage loads but limited centralized connectivity, making containerized or package WWTPs a practical and quickly deployable alternative. These modular plants are inherently pump-intensive: they require compact submersible transfer pumps, dosing pumps, recirculation pumps, sludge handling pumps, and treated-water reuse pumps, all designed for intermittent flow patterns, limited space, and often harsh operating conditions. Recent Mexico-specific projects strengthen this opportunity:

• In 2024, Mexico broke ground on the new San Antonio de los Buenos (SAB) WWTP in Tijuana, Baja California, replacing outdated lagoons with a modern, multi-module plant (oxidation ditch system) with a capacity of 18 million gallons per day; this modular design signals a clear shift toward scalable, compact sanitation infrastructure.
• Under the 2023–2025 U.S.–Mexico agreements (Minute 328 and subsequent updates), plans were accelerated to expand SAB’s capacity further and add new pumping nodes feeding into treatment units, directly increasing demand for reliable, corrosion-resistant lift-station and transfer pumps in the Tijuana River basin.
• In Nuevo Laredo and other border/peri-urban zones, wastewater infrastructure upgrades supported by NADBank/BEIF financing are typical of projects that rely on small-scale, distributed pumping stations to reduce untreated discharge into rivers and cross-border waterways.

As Mexico prioritizes fast-deployable sanitation capacity and localized wastewater reuse (especially in arid and semi-arid regions), this pull toward decentralized and modular systems will grow, creating a high-growth niche for compact, corrosion-resistant pumping equipment tailored to space-constrained, intermittent-flow environments.

Mexico Water and Wastewater Pump Market Challenge:

Aging Infrastructure and Poor Maintenance Culture

The single biggest constraint on market growth is the widespread presence of aging, poorly maintained pumping infrastructure, especially in many municipalities and smaller towns. Large portions of the existing water and wastewater networks use outdated pumps and motors that are inefficient, prone to failure, and result in high energy bills and frequent breakdowns. Limited municipal budgets, lack of skilled maintenance staff, and weak asset management practices mean that many operators delay necessary upgrades and repairs, leading to chronic underperformance of pumping systems. This situation discourages investment in new, higher-specification pumps because customers prioritize low upfront cost over long-term reliability, slowing the adoption of advanced, energy-efficient models. Overcoming this inertia requires not only capital but also local capacity building, spare parts networks, and long-term service contracts, which remain a significant operational and commercial challenge for pump suppliers across Mexico.

Mexico Water and Wastewater Pump Market Trend:

Shift to Smart and Solar-Powered Pumping Systems

A major trend accelerating penetration in Mexico’s water and wastewater pump market is the shift from conventional pumping toward digitally controlled (smart) and solar-supported pumping systems, aimed at lowering lifecycle costs and improving reliability. Municipal utilities are increasingly moving to pumps integrated with VFD/VSD drives, pressure/flow sensors, and SCADA connectivity to stabilize pressure, reduce energy waste, and detect leakage-driven losses through better control of pumping cycles. This trend is strengthened by Mexico’s water stress reality, where the emphasis is shifting from “more pumping” to optimized pumping. Key Mexico-specific instances validating this trend include:

• June 2024 (Monterrey): Implementation of the Xylem Vue (GoAigua) digital platform for leak detection and unified network management, enabling real-time pressure/flow control, directly increasing demand for SCADA-ready pumps and controls.
• July 2024 (State of Mexico): Adoption of cloud-based SCADA by the Water Commission of the State of Mexico to modernize operational decision-making and improve system uptime.

Overall, manufacturers are increasingly bundling pumps with remote monitoring + solar kits, shifting competition toward resilience and total cost of ownership rather than only throughput.

Mexico water and wastewater pump Market (2026-32): Segmentation Analysis

The Mexico water and wastewater pump Market study of MarkNtel Advisors evaluates & highlights the major trends and influencing factors in each segment. It includes predictions for the period 2026–2032 at the country level. Based on the analysis, the market has been further classified as:

Based on Pump Type:

• Centrifugal Pumps
  • Overhung Pumps
    • Vertical Inline
    • Horizontal End Suction
  • Split Case Pumps
    • Single/Two Stage
    • Multistage
  • Vertical Pumps
    • Turbine
      • Solid Handling
      • Non-Solid Handling
    • Axial
    • Mixed Flow
  • Submersible Pumps
    • Solid Handling
    • Non-solid Handling
• Positive Displacement Pumps
  • Diaphragm Pumps
  • Piston Pumps
  • Gear Pumps
  • Lobe Pumps
  • Progressive Cavity Pumps
  • Screw Pumps
  • Vane Pumps
  • Peristaltic Pumps
  • Others

Based on pump type, centrifugal pumps dominated the Mexico water & wastewater pump market in 2025, as they are widely preferred for high-flow municipal water supply, sewage transfer, and treatment plant circulation. Their leadership is supported by high operational efficiency, lower lifecycle cost, easy maintenance, and strong compatibility with large-scale infrastructure systems, making them ideal for continuous-duty applications.

Going forward, submersible pumps are projected to be the fastest-growing segment and are expected to gain major traction through 2032, driven by increasing investments in wastewater infrastructure upgrades, floodwater management, lift stations, and deep-well applications. As urbanization and sanitation projects expand, submersible pumps could progressively capture a larger market share and emerge as a key dominating segment in the upcoming years.

Based on End User:

• Municipal Water and Wastewater
• Industrial Water and Wastewater

Based on end user, the municipal water & wastewater segment led the Mexico water and wastewater pump market in 2025, capturing around 70.2% share, supported by strong demand from city water supply networks, sewage treatment plants, drainage systems, and pipeline modernization projects. Rising urban population, aging water infrastructure replacement, and government focus on improving water access and sanitation coverage continue to reinforce municipal procurement of pumps across Mexico.

However, the industrial water & wastewater segment is expected to register the fastest growth, expanding at a projected CAGR of 3.7% during 2026–2032. This growth is driven by increasing wastewater compliance requirements, expansion of manufacturing and processing industries, and higher adoption of efficient pumping solutions for water recycling, effluent discharge treatment, and continuous plant operations, positioning it to gain significant market share in the coming years.

Gain a Competitive Edge with Our Mexico Water and Wastewater Pump Market Report

• Mexico water and wastewater pump Market Report by MarkNtel Advisors provides a detailed & thorough analysis of market size & share, growth rate, competitive landscape, and key players. This comprehensive analysis helps businesses gain a holistic understanding of the market dynamics & make informed decisions.
• This report also highlights current market trends & future projections, allowing businesses to identify emerging opportunities & potential challenges. By understanding market forecasts, companies can align their strategies & stay ahead of the competition.
• Mexico water and wastewater pump Market Report aids in assessing & mitigating risks associated with entering or operating in the market. By understanding market dynamics, regulatory frameworks, and potential challenges, businesses can develop strategies to minimize risks & optimize their operations.

*Reports Delivery Format - Market research studies from MarkNtel Advisors are offered in PDF, Excel and PowerPoint formats. Within 24 hours of the payment being successfully received, the report will be sent to your email address.